New Vogamakina Powder coat oven electrical metal powder coating machine drying equipment
İSTANBUL/PENDİK
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+90 532 344...
Show
+90 532 344 49 50
+90 216 210...
Show
+90 216 210 13 11
Turkey 
Turkey, İSTANBUL/PENDİK
Turkey, İSTANBUL/PENDİK
Turkey, İSTANBUL/PENDİK
Turkey, İSTANBUL/PENDİK
Turkey, Çorum
Germany, Pullach
Germany, Dortmund
Uzbekistan, Tashkent
Uzbekistan, Tashkent
Spain, Barcelona
Spain, Barcelona
Germany, Dabergotz
Purpose of use : Powder curing
Maximum temperature : 220ºC
Material of outer surface : 1mm Carbon steel sheet metal, externally powder coated
Material of inner surface : 1mm Galvanized steel sheet metal, non-coated
Insulation thickness : 150 mm
Insulation : Ground – 50mm of Rock wool (50 kg/m³)
Side and top panels – 150mm of Rock wool (50 kg/m³)
Heat transfer : Convection, by closed air circuit
Heating Type : Direct heating with electrical heaters
Temperature control : On/Off, 0-400ºC Digital thermostat, Fe-Const (J-type) thermo-couple
Ambient temperature : +10ºC (while working)
Oven uniformity : ±2,5ºC (5ºC in total)
Control accuracy : ±1ºC
Heat-up time : 25-30 min (empty oven)
Oven door : Manual, Hinged type, from one side
Loading/Unloading : Hand pushed from shop floor into the oven
EXPLANATIONS
The furnace heating system is designed as forced convection system. It is based on the principle of pumping the oven volume air into the oven with the help of a circulation fan and increasing the oven temperature with the heat transfer provided by the air passing through the heating unit.
The walls of the furnace and heating unit are made of modular sheet metal and high density insulated panels. Air distribution ducts with regulated flaps inside the oven ensure that the oven temperature is homogenous at every point. The temperature control device is digital type and provides precise adjustment of the oven temperature.
The heating unit is placed on the side, rear or top of the oven and consists of an insulated heating chamber, heating cell with resistance inside, circulation fan that can operate at 250ºC and maintenance cover.
HEATING UNIT
Source : Electricity
Circulation fan : 380V 50Hz, sheet metal body and propeller
Heating energy demand : According to the oven volume
Electrical heaters : 380V tube type, surface increased serpentine heaters
CONTROL PANEL AND ELECTRICAL INSTALLATION
The electrical control cabinet is mounted externally on the side wall of the oven and is internally wired from the motors and heating system to the cabinet. The control panel consists of SCHNEIDER ELECTRIC branded switchgear components and from panel elements in accordance with international standards.