Trumpf TruMatic 6000-1600 fiber turret punch press
Kaiserslautern
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 162 58...
Show
+49 162 5858448
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Backnang
Germany, Kaiserslautern
Germany, Augsburg
Germany, Backnang
€1,200
≈ US$1,384
Germany, Wissen
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Backnang
Germany, Kaiserslautern
Location: PL
Control Brand: SIEMENS
Laser Power: 3 kW
Max. Sheet Thickness: 6.4 mm
Punching Force: 180 Kn
Laser source: TruDisk 3001 solid-state laser, 3,000 W, fiber-optic beam delivery (10 m), compact cutting head, anti-collision, protective glass, closed beam guidance, programmable cutting gas pressure
Control/OS/Interface: Rexroth IndraMotion MTX CMP70; Windows Embedded; 17-inch touchscreen; 4 GB program memory; 320 GB HDD; USB; RJ45 10/100 Mbit/s; Internet teleservice; integrated technology database; NC program management; production planning; automatic machine shutdown; network connection for programming/production systems
Punching (no reposition): 3,050 x 1,550 mm
Laser cutting (no reposition): 3,050 x 1,550 mm
Combined (no reposition): 2,500 x 1,550 mm
Combined (with reposition): 3,050 x 1,550 mm
Max sheet thickness: 6.4 mm; Max workpiece weight: 230 kg
Max part size via flaps: 500 x 500 mm (laser) / 500 x 500 mm (punching); via chute: 80 x 50 mm
Drives: Maintenance-free AC servo motors (X/Y/C); electrohydraulic punching head
Max speeds: X 90 m/min; Y 90 m/min; simultaneous 108 m/min; C-axis 330 rpm (punching/thread forming)
Frequencies: Max punching at E=1 mm: 917 strokes/min; marking: 2,800 strokes/min
Accuracy: Pa ±0.1 mm; Ps ±0.03 mm; min increment 0.001 mm
Force: 180 kN; electrohydraulic head; rotary single-station tool holder
Tool circumferences: punching 76.2 mm; forming 101.6 mm; optional 110 mm
Change times: basic 3.2 s; MultiTool 0.3 s
Magazine: 25 linear positions; standard 22 tools; up to 220 with MultiTool
Clamps: 3 hydraulic; fully rotatable tools; programmable blank-holder; tool length compensation; punch lubrication; chip extraction with automatic tube emptying and fill-level estimation; stroke counter; tool lubricant level monitoring; WhisperTools compatible
Max MultiBend: width 55 mm; height incl. material 25 mm; angle up to 90°
Mild/structural steel: up to 6 mm (O2 or N2)
Stainless steel: up to 6 mm (N2)
Aluminum: up to 5 mm (N2)
Laser functions: NitroLine; FocusLine; FastLine; FlyLine; ControlLine; slug detection; ejector cylinder for laser-cut parts; laser event log; automatic cutting-head height adjustment
QuickSet punch setting/measuring system: punch/die clearance check; punch length measurement; grinding amount determination
Working area
Axes/performance
Punching unit
Forming/punching functions
MultiTool
MultiBend
thread forming (M2.5–M10)
surface marking/embossing
vertically movable clamps
Automatic thread-forming lubrication
thread counter
Laser cutting capability (max thickness)
Standard machine equipment and safety
Rigid C-shaped welded frame
coordinate guide system
linear tool magazine
3 hydraulic clamps
programmable repositioning
foot switch for clamp closing
Radiation protection at cutting head
two 500 x 500 mm part flaps with sensors
Ball tables
two finished-part containers
chip container
Compact dust extraction and filtration unit
Water-air cooling unit (machine and laser)
Initial hydraulic oil filling
Two-level safety light curtains
fast drive shutdown
protection against scattered laser radiation
Right internal positioning pin
CE marking and Declaration of Conformity
Additional equipment
Smart Punch Monitoring
Optical monitoring of last punching operation
punch-breakage detection
automatic check before tool change
Additional/advanced clamping
Additional clamps for thin sheets
individually opening clamps
vertically movable clamps (max vertical stroke 12 mm)
automatically closing clamp holder with optical sensor
Pneumatic Blank Holder
Two pneumatic cylinders (left/right of punching head)
operates independent of installed tool
Thin sheet processing package
Brush tables for sensitive materials
vertically moving support-table balls
blowout tooling for small parts
sheet bulge detection
Chip conveyor
Automatic chip conveyor
tilting chip container for extended unattended time
SheetMaster 3000 x 1500 mm (AK04) – automatic sheet loading/unloading
Max unload sheet 3,000 x 1,500 mm
min 600 x 370 mm
thickness 0.5–8 mm
max sheet weight 230 kg
Max speeds: X 180 m/min
Z 30 m/min
maintenance-free digital servo drives
Parallel loading/unloading
sheet separation
positioning support
monitored unloading of laser-cut parts
scanner-monitored area
GripMaster 3000 x 1500 mm – automatic skeleton removal
Max skeleton 3,000 x 1,500 mm
thickness up to 8 mm
weight up to 230 kg
Max stack height 230 mm
skeleton stack weight up to 2,000 kg
Sensor-monitored grippers
automatic stacking
tilting skeleton pallet
removal nearly parallel to next-sheet loading
Double Rail Cart System – Large format
Double loading/unloading carts
max loading 3,000 kg
max unloading 3,000 kg
Upper cart edge 747 mm
lower 290 mm
Euro-pallet loading/unloading height up to 200 mm (upper/lower)
Double raw-material capacity
two-material supply
increased finished-part capacity
Part sorting support with SheetMaster
manual cart load/unload parallel to production
Adaptable rails
recessed or floor-mounted configurations
Storage integration
Storage interface
automated connection to material storage
TruStore and STOPA integration
TC-CELL / TruTops Fab Module Storage connection
Automated production/material flow
raw/finished sheet data exchange
Storage-connected safety system
additional light-protection area
safety fencing where required
Tooling and tool preparation
RTC cassettes incl. die plates
lightweight
high-acceleration capable
secure heavy-tool holding
ergonomic handle
QuickSharp tool grinding system with automatic tool length measurement
suitable for re-sharpening punches and WhisperTools
extends tool life